Dakota Digital STR4D Manual de Serviço

SERIES II VACUUM FLUORESCENT DIGITAL DASHBOARD The latest in digital dashboard technology for the street rodder, car, and truck enthusiast.

Setting up the control box SPEEDOMETER CALIBRATION The speedometer calibration is done using the TRIP and RESET switches. There are two different w

TACHOMETER DIP SWITCH SETTINGS The control box will work with 4, 6, 8, and 10 cylinder ignition systems. The DIP programming switches are located in

GAUGE WARNING FEATURE The gauges have the built in feature to alert you when they are outside their normal operation range. The fuel display will fl

TROUBLESHOOTING GUIDE This is a list of some problems and their solutions which may be encountered when installing your instrumentation system. I

Symptom Possible Problem Solution ----------------------------------------------------------------------------------------------------------------

Symptom Possible Problem Solution ----------------------------------------------------------------------------------------------------------------

Thank you for purchasing the Vacuum Fluorescent Digital Dashboard from DAKOTA DIGITAL, the leader in custom automotive electronics. Representing th

INSTALLING THE DISPLAY SYSTEM The first step in installing your new digital gauge kit will be to remove the instrumentation cluster from your vehic

CONTROL BOX Once the display panel is in place, mount the control box within the connecting cable's distance (approximately 3 feet) and secure

SPEED The BROWN wire from the display panel connects to the SPEED terminal. This system can accept 4000 ppm – 128000 ppm speed signals. The control

TRIP The TRIP terminal is used for the trip odometer function, for setting the oil warning set point (see WRN), and for speedometer calibration (see

BRAKE The BRAKE terminal can be used as a brake system warning indicator. The BRAKE input is activated by a ground signal from the brake pressure s

MPH/KPH The MPH/KPH terminal is activated by a 12 volt signal from a push button or toggle switch(not supplied). When the display system is in Engl

Insert cable with red stripe to right side. Optional display power connector used only on STR4D/5D sy